MIL-DTL-51485 Dye, Solvent Yellow 33This specification covers two types of yellow dye \(CAS 8003-22-3\), chemically known as 2-\(2-quinolyl\)-1,3-indandione; Type I - for solvent based binders and bowl and V type blenders, Type II - for air based fluidized bed type blenders.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8

METRIC

MIL --- DTL --- 51485B(EA)

5 July 2006

SUPERSEDING

DOD --- D --- 51485A(EA)

11 July 1986

DETAIL SPECIFICATION

DYE, SOLVENT YELLOW 33

Inactive for new design after 27 Dec 1995.

This specification is approved for use by the U.S. Army Edgewood

Chemical Biological Center and is available for use by all Depart-

ments and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification covers Solvent Yellow 33 dye (CAS 8003 --- 22 --- 3), chemically

know as 2 --- (2 --- quinolyl) --- 1,3 --- indandione.

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 or 4 of this

specification. This section does not include documents cited in other sections of this specifica-

tion or recommended for additional information or as examples. While every effort has been

made to insure the completeness of this list, document users are cautioned that they must meet

all specified requirements of documents cited in sections 3 or 4 of this specification, whether or

not they are listed.

Comments, suggestions, or questions on this document should be addressed to: U.S. Army Edgewood

Chemical Biological Center, ATTN: AMSRD --- ECB --- ENA--- S, 5183 Blackhawk Road, Aberdeen Proving

Ground, MD 21010 --- 5424 or emailed to SpecsTeam@apgea.army.mil. Since contact information can

change, you may want to verify the currency of this address information using the ASSIST Online database

at https://assist.daps.dla.mil.

AMSC N/A

FSC 6820

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.